- 8-piece set MN Milling Cutters
- 3 and 5 piece set Chain Milling Cutters
- Rack Milling Cutters
- Special Form Milling Cutters
- Spline Milling Cutters
- Docetail Milling Cutters
- Slot Milling Cutters
We manufacture module milling cutters from 1 Module to 10 Modules. At the same time, we have knives in different modules and sizes in our stock.
The knives we manufacture are produced in accordance with the quality standards by passing the quality control and customer satisfaction is always followed as the most important factor.
* The cutting tools we produce comply with the quality standards and should not be equated with the 2nd quality cutting tools brought from abroad in the market. It should not be forgotten that it determines many factors such as its capacity, duration of atrophy, cleanness and quality of the work it opens.
8-piece set MN Milling Cutters Sample Dimensions
No | Module 20 | D(Outer Diameter) | d(Hole Diameter) |
---|---|---|---|
1 | M 0,25 | D 32 | d 13 |
2 | M 0,3 | D 32 | d 13 |
3 | M 0,4 | D 32 | d 13 |
4 | M 0,5 | D 32 | d 13 |
5 | M 0,6 | D 32 | d 13 |
6 | M 0,7 | D 32 | d 13 |
7 | M 0,8 | D 32 | d 13 |
8 | M 0,9 | D 32 | d 13 |
9 | M 1 | D 50 | d 16 |
10 | M 1,25 | D 50 | d 16 |
11 | M 1,5 | D 55 | d 22 |
12 | M 1,75 | D 55 | d 22 |
13 | M 2 | D 63 | d 22 |
14 | M 2,25 | D 63 | d 22 |
15 | M 2,5 | D 70 | d 22 |
16 | M 2,75 | D 70 | d 22 |
17 | M 3 | D 80 | d 27 |
18 | M 3,25 | D 80 | d 27 |
19 | M 3,5 | D 80 | d 27 |
20 | M 3,75 | D 80 | d 27 |
21 | M 4 | D 90 | d 27 |
22 | M 4,25 | D 90 | d 27 |
23 | M 4,5 | D 90 | d 27 |
24 | M 5 | D 100 | d 27 |
25 | M 5,5 | D 100 | d 27 |
26 | M 6 | D 110 | d 32 |
27 | M 6,5 | D 110 | d 32 |
28 | M 7 | D 110 | d 32 |
29 | M 8 | D 125 | d 32 |
30 | M 9 | D 125 | d 32 |
31 | M 10 | D 140 | d 40 |
32 | M 11 | D 140 | d 40 |
33 | M 12 | D 160 | d 40 |
34 | M 14 | D 160 | d 40 |
35 | M 16 | D 180 | d 50 |
Chain gear milling cutters from 6 modules to 25.4 modules are in our production.
The knives we manufacture are produced in accordance with the quality standards by passing the quality control and customer satisfaction is always followed as the most important factor.
* The cutting tools we produce comply with the quality standards and should not be equated with the 2nd quality cutting tools brought from abroad in the market. It should not be forgotten that it determines many factors such as its capacity, duration of atrophy, cleanness and quality of the work it opens.
3 and 5 piece set Chain Gear Milling Sample Dimensions
No | Chain | Relay Diameter | D(Outer Diameter) | d(Hole Diameter) |
---|---|---|---|---|
1 | 1/4″ – 6,35 | 3,3 | D 63 | d 22 |
2 | 5/16 – 8 | 5 | D 63 | d 22 |
3 | 3/8″ – 9,525 | 5,08 | D 71 | d 22 |
4 | 3/8″ – 9,525 | 6 | D 71 | d 22 |
5 | 3/”8 – 9,525 | 6,35 | D 71 | d 22 |
6 | 1/2″ – 12,7 | 7,75 | D 71 | d 22 |
7 | 1/2″ – 12,7 | 7,95 | D 71 | d 22 |
8 | 1/2″ – 12,7 | 8,51 | D 71 | d 22 |
9 | 5/8″ – 19,05 | 10,16 | D 90 | d 27 |
10 | 3/4″ – 19,05 | 11,91 | D 90 | d 27 |
11 | 3/4″ – 19,05 | 12,07 | D 90 | d 27 |
12 | 1″ – 31,75 | 15,88 | D 100 | d 27 |
We manufacture CP hobbing knives from 3/16 Cp to 3 Cp. At the same time, we also have different Module and size pocket knives in our stocks.
The knives we manufacture are produced in accordance with the quality standards by passing the quality control and customer satisfaction is always followed as the most important factor.
* The cutting tools we produce comply with the quality standards and should not be equated with the 2nd quality cutting tools brought from abroad in the market. It should not be forgotten that it determines many factors such as its capacity, duration of atrophy, cleanness and quality of the work it opens.
Rack Milling Cutters Sample Dimensions
No | Module | Profile Angle | Z(Number of teeth) | D(Outer Diameter) | d(Hole Diameter) |
---|---|---|---|---|---|
1 | M 1 | α 20 | Z 1 | D 90 | d 32 |
2 | M 1,25 | α 20 | Z 1 | D 90 | d 32 |
3 | M 1,75 | α 20 | Z 1 | D 90 | d 32 |
4 | M 2 | α 20 | Z 1 | D 90 | d 32 |
5 | M 2,25 | α 20 | Z 1 | D 90 | d 32 |
6 | M 2,5 | α 20 | Z 3 | D 140 | d 32 |
7 | M 2,75 | α 20 | Z 1 | D 125 | d 32 |
8 | M 3 | α 20 | Z 3 | D 110 | d 40 |
9 | M 3,25 | α 20 | Z 1 | D 125 | d 32 |
10 | M 3,5 | α 20 | Z 1 | D 125 | d 32 |
11 | M 3,75 | α 20 | Z 1 | D 125 | d 32 |
12 | M 4 | α 20 | Z 3 | D 140 | d 32 |
13 | M 4,5 | α 5°/35° | Z 1 | D 140 | d 32 |
14 | M 5 | α 20 | Z 1 | D 125 | d 32 |
15 | M 5,5 | α 20 | Z 1 | D 125 | d 32 |
16 | M 6 | α 20 | Z 2 | D 150 | d 40 |
17 | M 6,5 | α 20 | Z 1 | D 110 | d 32 |
18 | M 7 | α 20 | Z 1 | D 125 | d 40 |
19 | M 8 | α 20 | Z 1 | D 150 | d 32 |
20 | M 9 | α 20 | Z 1 | D 140 | d 40 |
21 | M 10 | α 20 | Z 1 | D 150 | d 40 |
22 | M 25 | α 20 | Z 1 | D 250 | d 50 |
23 | M 26 | α 20 | Z 1 | D 260 | d 60 |
24 | M 27 | α 20 | Z 1 | D 270 | d 60 |
25 | M 28 | α 20 | Z 1 | D 280 | d 60 |
26 | M29 | α 20 | Z 1 | D 290 | d 60 |
27 | M 30 | α 20 | Z 1 | D 300 | d 60 |
We manufacture special form milling cutters from 12 Modules to 30 Modules.
The knives we manufacture are produced in accordance with the quality standards by passing the quality control and customer satisfaction is always followed as the most important factor.
* The cutting tools we produce comply with the quality standards and should not be equated with the 2nd quality cutting tools brought from abroad in the market. It should not be forgotten that it determines many factors such as its capacity, duration of atrophy, cleanness and quality of the work it opens.
We manufacture milling cutters with wedges from 23x26x6 to 92x98x14.
The knives we manufacture are produced in accordance with the quality standards by passing the quality control and customer satisfaction is always followed as the most important factor.
* The cutting tools we produce comply with the quality standards and should not be equated with the 2nd quality cutting tools brought from abroad in the market. It should not be forgotten that it determines many factors such as its capacity, duration of atrophy, cleanness and quality of the work it opens.
Docetail Milling Cutters in different sizes are available in our production. At the same time, we have different modules and sizes of pocket knives in our stocks.
The knives we manufacture are produced in accordance with the quality standards by passing the quality control and customer satisfaction is always followed as the most important factor.
* The cutting tools we produce comply with the quality standards and should not be equated with the 2nd quality cutting tools brought from abroad in the market. It should not be forgotten that it determines many factors such as its capacity, duration of atrophy, cleanness and quality of the work it opens.
Slot Milling Cutters in different sizes are available in our production. At the same time, we have different modules and sizes of pocket knives in our stocks.
The knives we manufacture are produced in accordance with the quality standards by passing the quality control and customer satisfaction is always followed as the most important factor.
* The cutting tools we produce comply with the quality standards and should not be equated with the 2nd quality cutting tools brought from abroad in the market. It should not be forgotten that it determines many factors such as its capacity, duration of atrophy, cleanness and quality of the work it opens.