There are Shaving Cutters with different diameter and number of teeth from 1.25 modules to 10 modules.
The knives we manufacture are produced in accordance with the quality standards by passing the quality control and customer satisfaction is always followed as the most important factor.
* The cutting tools we produce comply with the quality standards and should not be equated with the 2nd quality cutting tools brought from abroad in the market. It should not be forgotten that it determines many factors such as its capacity, duration of atrophy, cleanness and quality of the work it opens.
MN Shaving Cutters Sample Dimensions
No | Module | α(Alfa) | β(Beta) | D(Outer Diameter) | d(Hole Diameter) | Direction |
---|---|---|---|---|---|---|
1 | M 1 | α 20° | β 12° | D 180 | d 63,50 | SAĞ |
2 | M 1,25 | α 20° | β 5° | D 184 | d 63,50 | SOL |
3 | M 1,5 | α 20° | β 12° | D 180 | d 63,50 | SOL |
4 | M 1,75 | α 20° | β 12° | D 180 | d 63,50 | SAĞ |
5 | M 2 | α 20° | β 12° | D 240 | d 63,50 | SAĞ |
6 | M 2,25 | α 20° | β 12° | D 240 | d 63,50 | SOL |
7 | M 2,5 | α 20° | β 10° | D 192 | d 63,50 | SAĞ |
8 | M 2,75 | α 20° | β 12°5′ | D 180 | d 63,50 | SAĞ |
9 | M 2,81 | α 20° | β 10° | D 243 | d 63,50 | SOL |
10 | M 3 | α 20° | β 0° | D 224 | d 63,50 | DÜZ |
11 | M 3,25 | α 20° | β 12° | D 240 | d 63,50 | SAĞ |
12 | M 3,5 | α 20° | β 10° | D 248 | d 63,50 | SAĞ |
13 | M 3,75 | α 20° | β 12° | D 240 | d 63,50 | SOL |
14 | M 3,78 | α 20° | β 10° | D 223 | d 63,50 | SOL |
15 | M 3,9233 | α 20° | β 3°30′ | D 237 | d 63,50 | SOL |
16 | M 4 | α 20° | β 15° | D 182 | d 63,50 | SAĞ |
17 | M 4,25 | α 20° | β 5° | D 235 | d 63,50 | SOL |
18 | M 4,5 | α 20° | β 15° | D 187 | d 63,50 | SAĞ |
19 | M 5 | α 20° | β 15° | D 240 | d 63,50 | SOL |
20 | M 5,25 | α 20° | β 12° | D 240 | d 63,50 | SAĞ |
21 | M 5,5 | α 20° | β 15° | D 183 | d 63,50 | SAĞ |
22 | M 6 | α 20° | β 12° | D 240 | d 63,50 | SAĞ |
23 | M 6,25 | α 25° | β 12° | D 245 | d 63,50 | SAĞ |
24 | M 6,5 | α 20° | β 12° | D 240 | d 63,50 | SOL |
25 | M 7 | α 20° | β 5° | D 242 | d 63,50 | SAĞ |
We manufacture DP Shaving Cutters from 24 Dp to 5 Dp. At the same time, we have different modules and sizes in our stock.
The knives we manufacture are produced in accordance with the quality standards by passing the quality control and customer satisfaction is always followed as the most important factor.
* The cutting tools we produce comply with the quality standards and should not be equated with the 2nd quality cutting tools brought from abroad in the market. It should not be forgotten that it determines many factors such as its capacity, duration of atrophy, cleanness and quality of the work it opens.
DP Shaving Cutters Sample Dimensions
No | DP | α(Alfa) | β(Beta) | D(Outer Diameter) | d(Hole Diameter) | Direction |
---|---|---|---|---|---|---|
1 | DP 14 | α 20° | β 12° | D 240 | 63,50 | SAĞ |
2 | DP 12 | α 20° | β 12° | D 240 | 63,50 | SAĞ |
3 | DP 12 | α 20° | β 12° | D 240 | 63,50 | SOL |
4 | DP 11 | α 20° | β 12° | D 240 | 63,50 | SAĞ |
5 | DP 11 | α 20° | β 12° | D 240 | 63,50 | SOL |
6 | DP 10 | α 20° | β 0° | D 235 | 63,50 | DÜZ |
7 | DP 10 | α 20° | β 0° | D 235 | 63,50 | DÜZ |
8 | DP 10 | α 20° | β 15° | D 225 | 63,50 | SAĞ |
9 | DP 10 | α 20° | β 12° | D 240 | 63,50 | SAĞ |
10 | DP 10 | α 20° | β 15° | D 246 | 63,50 | SOL |
11 | DP 10 | α 20° | β 12° | D 240 | 63,50 | SAĞ |
12 | DP 8 | α 18°30′ | β 12° | D 240 | 63,50 | SAĞ |
13 | DP 8 | α 20° | β 12° | D 240 | 63,50 | SAĞ |
14 | DP 8 | α 20° | β 12° | D 240 | 63,50 | SOL |
15 | DP 7,5 | α 21°40′ | β 5° | D 172 | 63,50 | SAĞ |
16 | DP 7 | α 20° | β 12° | D 240 | 63,50 | SAĞ |
17 | DP 7 | α 22°30′ | β 5° | D 180 | 63,50 | SAĞ |
18 | DP 6/8 | α 20° | β 10° | D 180 | 63,50 | SAĞ |
19 | DP 6 | α 20° | β 12° | D 240 | 63,50 | SAĞ |
20 | DP 6 | α 20° | β 12° | D 240 | 63,50 | SOL |
21 | DP 5 | α 20° | β 12° | D 240 | 63,50 | SAĞ |
22 | DP 5 | α 20° | β 12° | D 240 | 63,50 | SOL |
23 | DP 5 | α 25° | β 15° | D 177 | 63,50 | SAĞ |